Module 2: Pre-flight and Starting The Aircraft 
For this module, student should first read Airplane Flying Handbook (FAA-H-8083-3B)  Chapter 2

1.

Before starting this module, please read Airplane Flying Handbook (FAA-H-8083-3B) Chapter

2.  Each aircraft will have a checklist. Inside the Cessna, you will find a Checkmate Checklist as follows. On the left side of the list, you will find the Pre-Flight items.

Screen Shot 2021-09-21 at 10.53.44 AM.png
Screen Shot 2021-09-21 at 10.53.44 AM.png

2.

Prior to starting aircraft, the pilot should reference the 'Start' checklist.  The pilot should check through the line items on the checklist, then place the list on their lap, and use both hands to perform the engine start.  

Screen Shot 2021-09-21 at 10.53.44 AM.png
Screen Shot 2021-09-21 at 10.53.44 AM.png

3.

The pilot will start the aircraft, taxi to the runway, and perform the run-up.  The run-up is intended to ensure the aircraft is operating appropriately and safely before take-off.  

Screen Shot 2021-09-21 at 10.53.44 AM.png
Screen Shot 2021-09-21 at 10.53.44 AM.png